Frigidaire FAP09C3AJW Manual De Instrucciones página 17

3. Extend either side of the hose and
screw the hose to adaptor A.
4. Extend the other side of the hose
and screw it to adaptor B.
5. Slide the assembly onto unit.
6. Affix the adaptor B into the window
slider kit and seal.
31
All manuals and user guides at all-guides.com
Atención
No doble excesivamente el ducto.
Drainage
1. During dehumidifying mode,
remove the supplied rubber
stopper from the hose connector.
Screw a suitable length of hose
onto this connector. Place the
open end into a suitable drain,
and make sure there are no kinks
in the hose.
2. When the lower water tray reaches
a pre determined level, the unit
will emit a beep 8 times and the
digital screen will indicate P1. At
that moment the air conditioner
will stop immediately. The fan
motor will continue working (this is
normal). Move the unit to a
adequate place where the water
can be drain. Remove the cap
and let the water out. Restart the
unit until the P1 symbol has
disappear. If the Error code
repeats itself call the service team.
Remove the drain
plug
Continuous
drain hose
32