Installation - THERMEx PLASMEXFILTER II Instrucciones

M 535101001912042021

INSTALLATION

1. Ensure that the Plasmex filter is installed correctly, with the flow direction of the Plasmex filter
corresponding to the airflow outlet from the hood.
OUT
4. Ensure that the exhaust grid is free and unobstructed.
2. Plug the Plasmex fil-
ter into a 230V power
socket, and leave the
socket accessible for
future maintenance.
3. the components used to route the air through the
Plasmex filter should be a tight fit and sealed properly
to avoid air leaks.
THERMEX PLASMEx II fILtER
230 V
31
IN