Makita DSC251 Manual De Instrucciones página 4

ENGLISH (Original instructions)
Before installing and operating this machine, read, understand and follow all
instructions and operating procedures. Keep this Instruction Manual with the
machine.
Read, understand and follow all safety instructions and operating
procedures. If you do not understand the instructions, or if condi-
tions are not correct for proper operation, DO NOT OPERATE THE
MACHINE. Consult your supervisor or other responsible person.
SPECIFICATIONS
Model:
Voltage
Weight
Dimensions (L x W x H)
Cutting Capacity of a rebar
(620 N/mm / 90,000 psi )
2
No load speed
External Diameter of Blade
• Specifications and design may be subject to change without prior notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
WARNING
Read and understand this instruction manual before
operating this machine. Failure to follow operating
instructions could result in death or serious injury.
WARNING LABELS RELATED TO
SAFETY
Flying debris and loud noise hazards. Wear ear and
eye protection.
Moving blade. Keep hands clear while machine is
operating. Turn power off before servicing.
471 mm x 137 mm x 139 mm / 18-17/32" x 5-25/64" x 5-15/32" (excluding a handle)
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
4 ENGLISH
DSC251
D.C. 18 V
4.0 kg (8.82 lbs)
φ10 to φ25 mm (SD490)
3/8" to 1" (Grade 60)
2200 min
-1
110 mm / 4.3"
BL1830B / BL1840B / BL1850B / BL1860B
DC18SH