Description Of Your Ph Perfect; Identification Of Parts - Zodiac pH Perfect Instrucciones De Montaje Y De Uso

1

Description of your pH Perfect

6
8
22
All manuals and user guides at all-guides.com
Congratulations, you are now the owner of a Zodiac pH Perfect, which allows you to
regulate the pH of your pool simply and easily.
The pH Perfect measures the pH value between 0.0 (acidic) and 14.0 (alkaline)
using a pH sensor on the filtration system, which constantly analyzes the water in
your pool.
Depending on the value measured, the pH Perfect dosing pump injects the amount
of product needed to maintain the balance of the water in the pool.
The pH Perfect will function with either acid or alkaline dosing.
1.1.

Identification of parts

The pack contains the items shown and required to install your pH Perfect:
2
3
7
9
10 11
pH Perfect controller
1
Wall bracket
2
2 x Stainless-steel screws and plugs (Ø = 6 mm)
3
Polyethylene inlet tube (5 metres)
4
Intake pipe with 2-metre PVC tube and 3-metre cable
5
FPM lipped injection flap valve (3/8")
6
pH Sensor with 5-metre shielded cable
7
Injection flap valve reducer
8
Sensor holder, model PSS3 (1/2")
9
Collar for fixing the injection valve to DN 50 mm pipe
10
Collar for fixing the injection flap valve on tube DN 50 mm
11
pH calibration fluid kit
12
1
5
12
4