Garmin Tread Instrucciones De Instalación página 5

Replacing the Trim Ring
You can replace the trim ring on your device with one of the included, colored trim rings.
1 Remove the device from the mount.
2 Pull back on the existing trim ring to remove it from the device.
3 Place the new trim ring on the device and snap it into place.
Tread Specifications
™
Water resistance
Operating temperature range
Charging temperature range
Power input (vehicle power cable, motorcycle, or external power)
Battery type
Battery voltage range
Wireless frequencies/protocols
1
The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating.
Installation Instructions
1
IEC 60529 IPX7
From -20° to 55°C (from -4° to 131°F)
From 0° to 45°C (from 32° to 113°F)
From 12 to 24 Vdc
Lithium-ion battery
From 3.5 to 4.1 V
2.4 GHz @ 18 dBm maximum
5