Attach The Front Panel; Detach The Front Panel - Philips CE233 Manual Del Usuario

4
Slide the unit into the sleeve until you hear
a "click".
5
Attach the trim plate.
6
Reconnect the negative terminal of the car
battery.

Attach the front panel

1
Insert the notch on the front panel to the
chassis on the main unit.
2
Press the left end of the front panel
inwards until it is securely locked with a
"click".

Detach the front panel

Note
•
Before you insert an SD/SDHC card or reset the
system, detach the front panel.
•
Before you detach the front panel, make sure that the
system is turned off.
1
Press to release the front panel.
2
Pull the front panel outwards to remove it.
EN
9