Product Description - Dörr LT-2020 Manual De Instrucciones

THANK YOU for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before
first use.
Keep this instruction manual together with the device for future use. If
other people use this device, make this instruction manual available. This
instruction manual is part of the device and must be supplied with the de-
vice in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to
observe the instruction manual and safety hints.
01 | SAFETY HINTS
To prevent the illuminated area from scratches do not touch with objects
•
that have sharp edges on the light panel. Do not use as a cutting mat.
Protect the device from rain, moisture, direct sunlight and extreme tem-
•
peratures.
Do not operate or touch the device with wet hands.
•
Protect the device against impacts. Do not use the device if it has been
•
dropped. In this case a qualified electrician should inspect the device
before you use it again.
Do not attempt to repair the device by yourself. Risk of electric shock!
•
When service or repair is required, contact qualified service personnel.
Only operate with the supplied AC adapter. Do not use an extension cord.
•
LED Bulbs cannot be replaced.
•
Do not use the device nearby mobile phones and devices that generate
•
strong electromagnetic fields (e.g. electric engines).
People with physical or cognitive disabilities should use the device with
•
supervision.
Protect the device against dirt. Never use aggressive cleansing agents or
•
benzine to clean the device. We recommend a soft, slightly damp micro-
fiber cloth to clean the outer parts of the device. Make sure to take the
device off power before cleaning!
Store the device in a dust-free, dry and cool place.
•
This device is not a toy. To prevent accidents and suffocation keep the
•
device, the accessories and the packing materials away from children
and pets.
If the device is defective or without any further use, dispose of the device
•
according to the Waste Electrical and Electronic Equipment Directive
WEEE. For further information, please contact your local authorities.
GB

02 | PRODUCT DESCRIPTION

Ultra-slim LED light panel for viewing slides and negatives, for drawing
and tracing.
Can be also used e.g. as a backlight at exhibitions and fairs.
03 | FEATURES
Ultra slim design – only 8mm high!
•
Durable, secure and energy-saving LEDs
•
Infinitely dimmable
•
High-quality acrylic panels
•
Unobtrusive power supply in white colour
•
Supplied with protection cover
•
04 | NOMENCLATURE
1 LED panel
2 On/Off button
3 AC adapter socket
4 AC adapter
05 | OPERATION
1. Connect the AC adapter (4) with the AC adapter socket (3) at the Light
Tablet and connect the AC adapter with an outlet.
2. Turn on the Light Tablet pressing the On/Off button (2) once slightly.
DIMMING
For dimming press the On/Off button (2) and hold it until the desired
brightness is achieved.
After use turn the Light Tablet off and disconnect from power source.
06 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We
recommend a soft, slightly damp microfiber cloth to clean the outer parts
of the device. Make sure to take the device off power before cleaning! Store
the device in a dust-free, dry and cool place. This device is not a toy – keep
it out of reach of children. Keep away from pets.
05