Foreword; Preliminary Warnings; Introduction; Recommended Uses - SCOPREGA GE BTP-1 Manual Del Usuario

M A N U A L O F
SAVE THIS INSTRUCTIONS MANUAL FOR REFERENCE

2. FOREWORD

Dear customer,
congratulations on choosing Scoprega.
We design and manufacture products of the highest quality to meet the needs
of our customers. Scoprega offers the highest quality in service as well. Our
specialised departments provide support and instructions when needed, as well
as comprehensive technical service.
We thank you for your trust.
WARNING
Read these instructions before using the inflator. Failure to follow all the instructions listed
below may result in damage to the product and/or cause serious injury to persons.

3. PRELIMINARY WARNINGS

1. Read these instructions.
2. Keep this manual.
3. Thoroughly follow the instructions.
4. Protect the power cable against possible damage.
5. For servicing, contact qualified personnel only.
In the event of problems or damage to the inflator, contact the service centre.
6. Do not disassemble the device. Incorrect reassembly can result in short circuits.
7. Ensure adequate ventilation and avoid placing objects on or around the inflator during operation.
8. Do not block the air vents.
9. The inflator produces vibrations that could make it move. Do not place the device on high surfaces
and monitor its movements.
10. Do not use the inflator with adapters other than those provided in the package since they could
damage the device.
11. Keep the device out of the reach of children.
DO NOT POWER THE INFLATOR WITH A
VOLTAGE HIGHER THAN THE RATED ONE.

4. INTRODUCTION

The GE BTP-1 is a high-efficiency portable electric inflator, which stands for reliability and functionality.
It is equipped with an inflation system allowing inflation at a pressure between 10 and 1000 mbar, and
with a control system ensuring automatic shut-down at the selected pressure.
10
I N S T R U C T I O N S

5. RECOMMENDED USES

Rubber dinghies (max 3m), kites, SUP boards, rafts, air mattresses,
swimming pool floats.

6. TECHNICAL SPECIFICATIONS

VOLTAGE FLOW RATE
ITEM
(V)
(L / minute)
420 (turbine)
GE BTP-1
12 Vdc
120 (piston)

7. GENERAL SAFETY RULES

1. ALWAYS TAKE INTO ACCOUNT THE WORKING ENVIRONMENT.
Do not expose the inflator to rain. Do not use in the presence of flammable liquids or gases.
2. AVOID UNINTENTIONAL START-UPS.
Do not start the inflator with the inlet in contact with dust or water.
3. CHECK THAT THERE ARE NO DAMAGED PARTS.
Before using the inflator, make sure that the external parts are intact and that the inflator works as
described.
4. DO NOT USE
the inflator near flammable liquids or in gaseous or explosive atmospheres. The
inflator motor produces sparks that can ignite fumes.
5. DO NOT INHALE!
The compressed air coming from the inflator is not clean. Never inhale air from the inflator or from a
breathing device connected to the inflator.
6. WARNING! RISK OF EXPLOSION.
Inflate to the pressure recommended by the inflatable manufacturer. An excessive pressure can cause
a burst dangerous to people.
7. NEVER LEAVE THE DEVICE UNATTENDED.
An excessive pressure can cause a burst dangerous to people.
8. WARNING! RISK OF MALFUNCTIONING.
Do not modify or attempt to repair the device. Do not perforate the casing or make any changes to
the inflator or its parts.
9. WARNING! RISK OF FIRE.
Allow the inflator to cool down for 10 minutes after using it for 20 minutes max. A prolonged use can
cause overheating and damage the product.
10. Never handle the pump using the hose or cable.
11. BE CAREFUL.
Care must always be taken. Use common sense.
MAX.
POWER
PRESSURE
CONSUMPTION
FUNCTIONS
(mbar)
(A)
INFLATION /
1000 14.5
DEFLATION
11