General Settings - Beaba ZEN PREMIUM Instrucciones

VII. GENERAL SETTINGS
• Adjusting the brightness:
1. Press the Menu button on the display screen, select
2. Press the up and down buttons to adjust the brightness.
• Set the time: :
1. Press the Menu button on the display screen, then select
2. Press the direction buttons to change the date, time and time display mode.
• Set the language:
1. Press the Menu button on the display screen, then select
2. Select the language of your choice.
• Adjust the sound
1. You can set the sound to mute the parent unit. Press the Menu button and select then
the direction buttons turn the sound down to maximum. You will only receive visual alarms if there
are crying and movement detections.
• Set sleep mode:
You can set sleep mode to increase autonomy.
1. Press the Menu button on the display screen and select
2. Select the sleep mode: 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or press «off»
to deactivate it.
• SD card*:
1. SD card* may be inserted into the receiver and/or the camera. The SD card* in the receiver will
allow you to record photos and videos on the receiver - see the PARENT UNIT INTERFACE (RE-
CEIVER) section and the following points in the section «SD Card*» section for further details.
2. The SD card* in the camera enables automatic recording when motion or noise is detected. You
will receive a noti cation on your phone and can view the alert history. To explore the features
of the application in further details, you can refer to the FAQ section of the Zen connect app.
3. Press the Menu button on the display screen, then select
You will be able to view the total capacity and the remaining capacity of your SD card*.
4. You can format the SD card* according to your needs but make sure that you have saved any
important data.
5. If no SD card* is inserted, you will see the following message «No SD card* detected».
*(SD card not supplied)
• Updating:
Make sure that your camera is connected to a 2.4 Ghz Wi-Fi network.
You can update your camera when the «Update» noti cation appears. Or press Menu on the
display screen, then select
• Low battery alarm:
When the screen's battery is low, the low battery alarm is displayed on the screen.
Please recharge the screen as soon as possible.
> Version information to check whether an update is available
25
> Date and Time.
> Language.
> with
> Sleep mode.
> Manage the SD card*