Astral ACQUA DOS Manual De Instalación página 13

Paragraph 10 - Setting the Pause
Programming
Paragraph 11 – Password
Programming
Paragraph 12 - Statistics
Programming
EM00136592
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
the keys to set the new value (N. OPEN or N.
CLOSED).
Press to confirm and return to the main menu.
By entering the password, you can enter the programming
menu and see all the set values. The password will be
requested whenever you seek to modify them.
The flashing line indicates the number than can be
modified. Use the
9), and the
Confirm by pressing the
(default), the password is eliminated.
The main menu displays the pump operation times. By
pressing the
- Strokes = number of strokes made by the pump
- Q.ty (L) = quantity dosed by the pump in litres; this figure
is calculated on the basis of the memorised cc/stroke value
- Power = number of pumps starts
- Reset = use the
otherwise (NO), then confirm by pressing the
Pressing the
rev. 1.0 EN
Operation
Operation
key to select the number (from 1 to
key to select the number to be modified.
key. By setting "0000"
Operation
key you can access other statistics:
to reset the counters (YES) or
key will take you back to the main menu.
key, then using
key.
11