Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
FIRST TIME USE
When the microwave is plugged in for the fi rst
time it will beep and the display will show "ENTER
CLOCK TIME". Use the number pad to enter the
current time and then press the clock button to
confi rm.
When setting the cook timer, the microwave will
return to standby mode if there is no input within 30
seconds.
During operation:
• Press the Start/Stop button to begin operation.
• Press the Start/Stop button once to pause a
program. Press again to resume the program.
• Press the Reset button to cancel a program.
• The microwave will beep four times and display
"END" at the end of a cooking program. The
microwave will continue to beep every two
minutes until the door is opened or any button is
pressed.
SETTING THE CLOCK
The clock can be only be set as a 12 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the
current time.
MICROWAVE COOKING
1. Press the Power Level button repeatedly to select
the power level.
2. Use the number pad to enter the desired cooking
time. The maximum time is 99 minutes and 99
seconds.
3. Press the Start/Stop button to begin operation.
Press Power Button
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Note: If "PL0" is selected, the microwave fan will
run with no cooking function. This power level can
be used to remove odors from the oven.
Note: During cooking, press the Power button to
check the current power level.
EXPRESS COOK
When the microwave is not in operation, press the
number pad from 1 to 6 and the microwave will run
between 1 and 6 minutes at 100% cooking power.
During cooking, press the power button to check the
current cooking power.
13
Power (Display)
100% (100)
90% (90)
80% (80)
70% (70)
60% (60)
50% (50)
40% (40)
30% (30)
20% (20)
10% (10)
0% (00)
Publicidad
Tabla de contenido
