Grounding Instructions - Danby Designer DDMW007501G1 Manual Del Propietário

IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord that has a grounding wire with a grounding plug.
The power cord must be plugged into an outlet that is properly grounded. If the outlet is a
standard 2-prong wall outlet, it is your responsibility to have it replaced with a properly
grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency
the appliance is designed for.
WARNING - Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualifi ed electrician or service agent if the grounding instructions are not
completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with another appliance in
the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or
remove the third ground prong from the power cord.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similar qualifi ed person in order to avoid hazard.
Have a qualifi ed electrician install a grounded outlet near the appliance if the power cord is
too short.
A short power supply cord is provided to reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
Power Consumption
Output
Operational Frequency
Outside Dimensions (H x D x W)
Interior Dimensions (H x D x W)
Oven Capacity
Net Weight
SAVE THESE INSTRUCTIONS!
6
120 V / 60 Hz, 1100 W
700 W
2450 MHz
26.2 cm x 31.2 cm x 45.2 cm
10.3 in x 12.3 in x 17.8 in
18 cm x 29.4 cm x 29.5 cm
7.1 in x 11.6 in x 11.6 in
0.7 cubic feet
~10 kg (~22 lbs)