Connecting A Passive Current Source; Connection Control; Operation; Operation Overview - Endress+Hauser RIA 261 Manual De Instrucciones

Digital field display

6 Operation

5.1.4 Connecting a passive current source

E.g. 2-wire transmitter with additional loop power supply:
ƒig. 6: Connecting a passive current source
An Ex certified unit can be applied as a front end display in the
non-hazardous area. This is not valid the other way round (non-
Ex unit in Ex area)!

5.2 Connection control

#
Before replacing the housing lid please make sure that the
electronics have been returned to the upright position and the
lock on the left hand side has latched in.
6 Operation

6.1 Operation overview

The following chapters inform on the commissioning and
operation of the field mounted display. These functions are
identical for both the Ex and non-Ex display versions.
37