Display And Operating Elements - Endress+Hauser RIA 261 Manual De Instrucciones

6 Operation
38

6.2 Display and operating elements

ƒig. 7: Display and operating elements
5 digit, LC display, indicated are:
•
Instantaneous numeric measured value (in operation).
•
Dialogue setting up text.
The bargraph displays the scaled measuring range. It
indicates the instantaneous percentage measured value.
Entry into set-up menu.
•
Selection of operating function in a function group.
•
Saving set-up data.
•
Selection of a function group within the menu.
•
Setting up parameters and numbers. (If the push button is
continuously held down then the number change on the
display increases).
•
The actual loop circuit current is displayed if the +/- push
buttons are held down in operation mode.
Additional information can be written into the identification
fields.
In order to do so, follow these instructions:
•
Degrease and clean the fields.
•
Write onto the fields using a light and water resistant
transparency pen.
Digital field display