Caracteristiques Techniques - Skil 7338 Manual Original

APPLICATION ADVICE
Move the tool in straight movements in line with the grain
- for sanding bare wood surfaces
-
Never use the same sanding sheet for wood and metal
- for removing paint and for sanding of extremely rough
wood use coarse grit sizes (40, 60)
- for sanding of rough or plain wood use medium grit
sizes (80, 100, 120)
- for smoothing of wood and surfaces with old paint as
(180, 240, 320)
!
- start sanding with coarse or medium grit
-
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always keep tool and cord clean (especially ventilation
slots C 2 )
- remove adhering sanding dust with a brush
! disconnect the plug before cleaning
manufacturing and testing procedures, repair should
power tools
- send the tool undismantled together with proof of
station (addresses as well as the service diagram of
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 7 will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under "Technical data" is in conformity with
EN 60745, EN 61000, EN 55014, in accordance with the
provisions of the directives 2004/108/EC, 2006/42/EC,
2011/65/EU
4825 BD Breda, NL
Marijn van der Hoofden
Operations & Engineering
SKIL Europe BV, 4825 BD Breda, NL
16.05.2013
NOISE/VIBRATION
Measured in accordance with EN 60745 the sound
pressure level of this tool is 85 dB(A) and the sound
The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
-
increase the exposure level
-
reduce the exposure level
!
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Ponceuse vibrante
INTRODUCTION
Cet outil sert au ponçage et au polissage à sec du bois,
des surfaces peintes, du plastique et du mastic
Cet outil n'est conçu pour un usage professionnel
Lisez et conservez ce manuel d'instruction 3

CARACTERISTIQUES TECHNIQUES 1

A
B Connexion pour aspirateur
C
Fentes de ventilation
SECURITE
INSTRUCTIONS GENERALES DE SECURITE
ATTENTION! Lisez tous les avertissements de
sécurité et toutes les instructions. Ne pas suivre les
avertissements et instructions peut entraîner un choc
électrique, un incendie et/ou de graves blessures sur
Conservez tous les avertissements
et toutes les instructions pour pouvoir s'y reporter
7
Olaf Dijkgraaf
Approvals Manager
7338
2