EGAmaster 65512 Manual De Instrucciones página 14

All manuals and user guides at all-guides.com
Note: when detecting the reference level, the detector should face the instrument in the range of
about 40º, to the high and left from the front.
Direct marking
After the reference level has been detected, mark a line along the detector's index, or its top or
bottom end.
Plain rod marking
After the reference level has been detected, mark a line along the plain rod's top or bottom end.
Note: If a line was marked along the detector's top or bottom end, be sure to make
measurement compensation as described on the back of the detector.
The detector should previously be positioned correctly on the plain rod according to the
reference mark.
Reading the regleta
After the reference level has been detected, read the regleta, using the index on the rod
adapter.
Note: When detecting the reference level, slightly loosen the fixing screw for the rod adapter
and move the detector up and down along the regleta.