EGAmaster 65512 Manual De Instrucciones página 8

Note:
•
For a tripod setting place, be sure to select a place where the ground or floor has less
vibration and there is no fear of upset.
•
To set the tripod on a slippery floor, the legs must be secured. Use a chain /or similar) to
keep the legs from spreading.
Setting up the instrument
Placing on the tripod: place the instrument on the tripod head and while holding the instrument
with one hand, secure it using the tripod center screw.
Placing on the wall mount:
Note:
•
Also when removing the instrument from the tripod, loosen the center screw while
supporting the instrument with one hand.
•
Do not leave the instrument placed on tripod without the center screw being tightened. It
may cause the instrument to fall and be damaged.
Arranging the detector
Installing the rod adapter
1. Place the instrument on the rod adapter so that the guide pin of the rod adapter is
inserted into the guide hole in the back of the detector.
2. Tighten the attaching screw of the rod adapter into the detector.
All manuals and user guides at all-guides.com