3.7
Technical specifications battery pack
/i
Description
voltage
capacity
energy
battery type
weight, ready for use
temperature range
3.8
Safety features of the battery pack
The battery pack is protected against:
•
Short-circuit
•
Deep discharge
•
Over- and under-voltage (of the battery pack and the individual cells)
•
Over-current during charging and discharging
•
Overcharging
•
Over temperature (of individual cells and electronics)
•
Charging and discharging outside the allowed temperature range
4
Preparation for first use
4.1
General
•
Check the equipment for completeness and damage. Do not use the equipment if it is damaged;
in that case contact the Holmatro dealer.
•
Check the operation of the deadman's handle. The deadman's handle must return to the neutral
position when you release it.
•
Before first use, always charge the battery pack completely. See section 5.2.
•
Check the state of charge of the battery by pressing the SOC indicator button for a few seconds.
See section 3.6.
•
Slide the battery pack in the battery pack fitting / adapter fitting until the battery pack lock snaps
tight.
•
Check the battery pack to ensure that the lock mechanism works correctly.
5
Operation
5.1
System operation
In a battery tool the hydraulic pump is integrated. The hydraulic pump is driven by a battery pack or from
an external electric power source. This pump displaces hydraulic oil and can build up pressure. The
hydraulic pump is connected directly to the hydraulic cylinder.
BCU * A *
All manuals and user guides at all-guides.com
Unit
VDC
Ah
Wh
kg
lb
°C
°F
916.400.018_003
BPA285
BPA286
28
5
126
Li-Ion
1
2.2
-20 + 55
-4 + 131
28
6
151
EN
39