Long-Term Storage - Holmatro BCU 05 A Serie Manual

• Check that the tightening torque of the centre bolt (B) is 50 Nm.
• Spray Teflon lubricating oil on and between the moving parts of the centre bolt (B) while the tool is
opening and closing.
CAUTION
The centre bolt may not be removed. Contact a Holmatro Certified Technician.
8.5.9 Snap rings of hinge pins
See Fig. 6.
• Check that the snap rings of the hinge pins (A) are present and are not damaged.
Have a Holmatro Certified Technician mount a new snap ring if it is missing or damaged.
8.6 Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.7 Packaging
In many regulations such as IATA (air), ADR (road) and IMO (sea), Li-Ion battery packs are considered
as dangerous goods. Please make sure that the goods are packed and transported in accordance with
the latest regulations. Consult your Holmatro dealer for detailed instructions.
8.8 Storage
8.8.1 Temporary storage
• Store the tool and the battery pack in a dry and well-ventilated dust-free area.
• Fasten the tool so it can not fall over to prevent oil leaking.
• Place the blade tips over each other to prevent injury. Do not fully close the spreading arms / blades
so that the tool can be stored without pressure.
• Check that the on/off switch is OFF.
• Apply a thin coat of preservative oil to the external steel parts.
8.8.2

Long-term storage

For long-term storage, carry out the same actions as for temporary storage, as well as the following
additional actions:
• Remove the battery pack from the tool.
• Always store the battery packs in a dry and cool area. Temperatures above 45 °C (113 °F) can have
a negative affect on the life cycle of the battery packs.
WARNING
Avoid short-circuiting the battery pack. Make sure the connections do not come in contact
with metal objects or water. Never try to open a battery pack.
CAUTION
If not removed from the tool, a fully charged battery pack will discharge in 3 months.
CAUTION
If the battery pack is removed from the tool and is not being recharged, it will slowly loose its
energy. Make sure that the battery pack is recharged at least once every year.
BCU * A *
All manuals and user guides at all-guides.com
916.400.018_003
EN
49