Assembling Your Breville Juice Fountain - Breville Juice Fountain Plus Manual

BR8085 JE95XL_Book_AMEND 28/8/07 1:47 PM

Assembling your Breville Juice Fountain

Step 1
Place filter bowl surround on top of the motor base.
1
Step 2
Align the arrows on the filter basket with the arrows on
the motor drive coupling and push down until it clicks
into place. Ensure the stainless steel filter basket is
fitted securely inside the filter bowl surround and onto
the motor base.
2
8
All manuals and user guides at all-guides.com
Page 8
Step 3
Place the juicer cover over the filter bowl surround,
positioning the feed chute over the stainless steel
filter basket and lower into position.
3
Step 4 Step 5
Raise the safety locking arm up and locate into Slide the food pusher down the feed chute by
the two grooves on either side of the juice cover. aligning the groove in the food pusher with the small
The safety locking arm should now be in a protrusion on the inside of the top of the feed tube.
vertical position and locked into place on top
Continue to slide the food pusher down the feed chute.
of the juicer cover.
5A
4A
FOOD PUSHER
GROVE
4B 5B
SMALL
PROTRUSION
INSIDE FEED
TUBE
9