Assembling Your Breville Juice Fountain - Breville Juice Fountain Plus JE95XL Instrucciones De Uso

ASSEMBLING YOUR BREVILLE JUICE FOUNTAIN

STEP 1.
Place filter bowl surround on top of the
motor base.
STEP 2.
Align the arrows on the filter basket with the
arrows on the motor drive coupling and push
down until it clicks into place. Ensure the
stainless steel filter basket is fitted securely
inside the filter bowl surround and onto the
motor base.
STEP 3.
Place the juicer cover over the filter bowl
surround, positioning the feed chute over the
stainless steel filter basket and lower into
position.
8
1
2
3
ASSEMBLING YOUR BREVILLE JUICE FOUNTAIN cont'd
STEP 4.
Raise the safety locking arm up and locate
into the two grooves on either side of the
juice cover. The safety locking arm should
now be in a vertical position and locked into
place on top of the juice cover.
STEP 5.
Slide the food pusher down the feed chute by
aligning the groove in the food pusher with
the small protrusion on the inside of the top
of the feed tube.
4A
4B
5A
FOOD PUSHER
GROOVE
SMALL
PROTRUSION
INSIDE FEED
TUBE
9