Intended Use - Flex ADM 30 smart Instrucciones De Funcionamiento Originales

ADM 30 smart

Intended use

This measuring instrument is designed for commercial
use in industrial and trade applications. The laser
distance-measuring device is designed for measuring
lengths, heights and gaps as well as determining surface
areas.
Laser distance-measuring device
– Do not point the laser beam at people or animals and
do not stare into the laser beam. This measuring tool
generates a laser beam, which can dazzle others.
– Have the measuring instrument repaired by qualified
technicians and with original spare parts only. This
ensures that the safety of the measuring instrument
is maintained.
– Do not let children use the measuring instrument
unsupervised. They could accidentally blind people.
– Do not use the measuring instrument in a potentially
explosive environment which contains flammable
liquids, gases or dust. The measuring instrument
may generate sparks which will ignite the dust or the
vapours.
– If devices other than the operating and adjusting
devices specified here are used or if different
procedures are implemented, this may result in
a hazardous exposure to radiation.
10
– Do not disable any safety devices and do not remove
any information or warning signs.
– Before switching on the device, check for visible
damage. Do not switch on damaged devices.
– When using the measuring instrument on ladders,
avoid an abnormal body posture. Ensure that you
have a secure footing and keep your balance at all
times.