Troubleshooting - Cub Cadet RT 45 Manual Del Operador

Problem
Wheels/Tines will not turn
Tines turn, but wheels don't
Wheels turn, but tines don't
Poor tilling performance

TROUBLESHOOTING

Cause
1. Improper use of controls.
2. Worn, broken or misadjusted drive belt(s).
3. Internal transmission wear or damage.
4. Bolt loose in transmission pulley.
1. Wheel Drive Pins not in WHEEL DRIVE.
2. Bolt loose in transmission pulley.
3. Internal transmission wear or damage.
1. Tine holder mounting hardware missing.
2. Bolt loose in transmission pulley.
3. Internal transmission wear or damage.
1. Worn tines.
2. Improper Depth Regulator setting.
3. Forward Drive Belt slipping.
1. Review Controls & Operation section.
2. Replace or adjust belts.
3. Contact authorized service dealer.
4. Tighten bolt.
1. Inserts Drive Pins properly.
2. Tighten bolt.
3. Contact authorized service dealer.
1. Replace hardware.
2. Tighten bolt.
3. Contact authorized service dealer.
1. Replace Tines.
2. See "Tilling Tips & Techniques."
3. See Service Section.
12
Remedy