Important Notes; Application; Technical Specifications - Franke A3000 open Instrucciones De Montaje Y Uso

4.

Important notes

• Installation, commissioning and maintenance must be performed only by a
qualified expert in accordance with the instructions provided, legal requirements
and recognised engineering standards.
• All technical connection regulations specified by the local water and electricity
supply companies must be observed.
• The power supply should be switched off before any work is carried out.
• We reserve the right to make changes.
5.

Application

System power supply - A3000open for switchgear mounting (TS35) for power supply of
A3000open taps along a system line length of max. 100 m, 230 V AC/24 V DC, 60 W.
6.

Technical specifications

Input:
Voltage:
Voltage range
Rated load:
Frequency:
Inrush current limitation:
Internal fuse:
Recommended back-up fuse,
circuit breaker
Mains failure shunting (rated load):
Transient overvoltage protection:
Outputs:
Voltage:
Voltage range
Rated current:
Max. regenerative strength:
Overload behaviour:
Residual ripple (rated load):
Switchable in parallel:
Switchable in series:
Efficiency
100-240 V AC
85-264 V AC (120-373 V DC)
1.4/0.6 A (110/230 V AC)
44-66 Hz
<30 A, NTC
2 A (inert)
6 A, 10 A, 16 A, characteristic B, C
10/80 ms
Varistor
24 V DC ± 2%
22.8-26.4 V DC
2.5 A
30 V DC
Constant current
Typ. 100 mVpp
Yes
Yes
Typ. 88%
- 5 -