PowerSmith DB2801RB Manual Del Usuario página 12

To Remove Battery Pack
1. Remove safety key.
2. Press and hold the battery latch button at the bottom of the battery pack.
3. Remove battery pack from the product.
Fig.5
NOTICE: Make sure that the latch on the snow blower snaps into place and that the battery pack is
secured to the unit before starting operation.
To Start Snow Blower
1. Install the battery pack to snow blower.
2. Insert safety key and close cover.
3. Press and hold on safety button, then squeeze the auger control trigger. And you can release safety
button after auger turning.
Safety Button
Auger Trigger
Fig 6
To Stop Snow Blower
1. Release the auger trigger.
2. Remove the battery pack and store in a secure location out of the reach of children.
3. Remove safety key.
12