Declaration Of Conformity - Skil 0790 Manual Original

- on/off switch defective -> contact dealer/service
station
- worn carbon brushes -> contact dealer/service station
- defective motor -> contact dealer/service station
- blowing/vacuum tube not completely mounted ->
mount two-part blowing/vacuum tube
★ Tool operates intermittently
- on/off switch defective -> contact dealer/service
station
- internal wiring defective -> contact dealer/service
station
- impeller blocked by foreign object -> remove blockage
★ No/low blowing power
- selector switch in vacuuming mode -> set selector
switch in blowing mode
★ No/low vacuuming power
- selector switch in blowing mode -> set selector switch
in vacuuming mode
- collection bag is full/dirty -> empty/clean collection bag
- vacuuming opening clogged up or blocked by foreign
object -> remove blockage
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol & will remind you of this when the need for
disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that the product
described under "Technical data" is in conformity with the
following standards or standardization documents: EN
60335, EN 61000, EN 55014 in accordance with the
provisions of the directives 2006/95/EC, 2004/108/EC,
2006/42/EC, 2000/14/EC, 2011/65/EU
• Technical file at: SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
30.07.2013
NOISE/VIBRATION
• Measured in accordance with EN/ISO 3744 the sound
pressure level of this tool is 77.1 dB(A) and the sound
power level 97.1 dB(A) (standard deviation: 2.2 dB), and
the vibration 7.4 m/s² (hand-arm method; uncertainty
K = 1.5 m/s²)
All manuals and user guides at all-guides.com
10
8
• Measured in accordance with 2000/14/EC (EN/ISO
3744) the guaranteed sound power level LWA is lower
than 100 dB(A) (conformity assessment procedure
according to Annex V)
• The vibration emission level has been measured in
accordance with a standardised test given in EN/ISO
5349; it may be used to compare one tool with another
and as a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Aspirateur-souffleur de jardin
INTRODUCTION
• Cet outil a été conçu pour souffler/rassembler et aspirer/
broyer les feuilles sèches et autres déchets secs de
jardinage, notamment l'herbe et les branches
• Cet outil est uniquement destiné à un usage domestique
et n'est pas conçu pour être utilisé dans des lieux
humides
• Cet outil n'est conçu pour un usage professionnel
• Lisez attentivement ce manuel d'instruction avant
d'utiliser l'outil et conservez-le pour pouvoir vous y
référer ultérieurement 3
• Prêtez attention aux consignes de sécurité et aux
avertissements; ne pas suivre ces instructions peut
entraîner des graves blessures
• Vérifiez que le conditionnement contient toutes les
pièces présentées dans le schéma 2
• Lorsque des pièces manquent ou sont endommagées,
veuillez contacter votre distributeur
CARACTERISTIQUES TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
A Tube inférieur de soufflage/d'aspiration
B Tube supérieur de soufflage/d'aspiration
C Bac récolteur
D Bretelle
E Dispositif d'immobilisation du cordon d'alimentation
F Interrupteur marche/arrêt
G Commutateur pour sélectionner le mode de
fonctionnement
H Roues d'appui
J Fentes de ventilation
K Poignée principale
L Poignée de guide
M Vis de fixation (4)
N Ouverture d'aspiration
0790