Sears Kenmore 26112 Serie Manual De Uso Y Cuidado página 10

9.
Select cycle settings
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle modifier buttons to change the Wash
Temp, Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Warm
Some cold water may be added,
so this will be cooler than what
your previous washer provided.
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Tap Cold
This is the temperature from your
faucet.
10
All manuals and user guides at all-guides.com
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or
fade
Light soils
Dark colors that bleed
or fade
Light soils
Dark colors that bleed
or fade
Light soils
10.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Two Rinses. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.
11.
Select Start/Pause/Unlock Lid
to begin wash cycle
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has finished, the CYCLE COMPLETE
indicator will light up. Promptly remove garments after cycle
has completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments, you
may do so during the first portion of the sensing step. Press
START/PAUSE/Unlock Lid; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/PAUSE/Unlock Lid again to restart the cycle. If lid is left
open for more than 10 minutes, the water will pump out.