If you experience
Washer not performing as expected (cont.)
Odors
Lid locked light is
flashing
Single-dose laundry
packet not dissolving
All manuals and user guides at all-guides.com
TROUBLESHOOTING
First try the solutions suggested here
for assistance and to possibly avoid a service call.
Possible Causes
Clean Washer maintenance not done
as recommended.
Using wrong or too much detergent.
The lid is not closed.
A cycle was stopped or paused using
the Start/Pause button.
Adding laundry packet
incorrectly.
Run the Clean Washer cycle every 30 washes. See "Washer Care"
in Washer Maintenance.
Use only HE detergent. Be sure to measure correctly.
Always follow the manufacturer's directions.
See "Washer Care" section.
Close the lid. The washer will not start or fill with the lid open.
The washer may still be spinning. The lid will not unlock until the
basket has stopped spinning. This may take several minutes if
washing large loads or heavy fabrics.
Be sure laundry packet is added to washer basket before adding
clothes. Do not add packet to dispensers. Follow manufacturer's
instructions to avoid damage to your garments.
Solution
17