Control Panel And Features - Sears Kenmore 26112 Serie Manual De Uso Y Cuidado

WASH CYCLE KNOB
1
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
CYCLE OPTIONS
2
When you select a cycle, its default options will light up.
NOTE: Not all cycles, options, and modifiers are available
on all models. You may also add or remove options for each
cycle. Not all options can be used with all cycles, and some
are preset to work with certain cycles.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
NOTE:
Press and hold FABRIC SOFTENER for 6 seconds
to turn cycle signal on or off.
TWO RINSES
This option can be used to automatically add a second
rinse to most cycles.
NOTE:
Press and hold TWO RINSES for 6 seconds to turn
button sounds on or off.
CYCLE MODIFIERS
3
When you select a cycle, its default modifiers will light up.
Not all cycles, options, and modifiers are available on all
models.
WASH TEMP
Wash Temp senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric.
• Warm and hot water may be cooler than what your
previous washer provided.
• Even in a Cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
All manuals and user guides at all-guides.com

CONTROL PANEL AND FEATURES

1
5
6
2
4
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle.
For most loads, use the soil level that is preset with
the cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
SOIL LEVEL to select less wash time, if needed. Lower soil
level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed based
on the cycle selected. The preset speeds can be changed.
Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
START/PAUSE/Unlock Lid button
4
Press to start the selected cycle; press again to pause the
cycle and unlock the lid. If the washer has been paused the
"wash" status light will flash. To restart the selected cycle
press start again.
NOTE: If the washer is spinning, it may take several minutes to
unlock the lid. Press and hold for 3 seconds to cancel a cycle.
POWER BUTTON
5
Press to turn the washer ON. Pressing once while the washer
is on will cancel the current cycle. Pressing twice will turn the
washer OFF.
3
5