Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Black and Decker REVDD12C Traducción De Las Instrucciones Originales

ENGLISH
Warning! Before performing any cleaning or maintenance on
the tool, unplug the charger.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage V
DC
No-load speed min
Max. torque
Nm
Chuck capacity mm
Max Drilling capacity
Steel/wood
mm
Weight kg
Integral Battery
Battery type
Ah rating
Charger
Input Voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time
h
Level of sound pressure according to EN 62841:
Sound pressure (L
Sound power (L ) 70 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Screwdriving without impact (a
8
(Original instructions)
REVDD12C
0-550rpm
-1
S010*1400040
) 59, uncertainty (K) 5 dB(A)
pA
2
) 1.1 m/s , uncertainty (K) 1.5 m/s
h
Declaration of conformity
The Supply of Machinery (Safety)
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Black & Decker at the
12
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
12.5/26
1-10
10/25
0.878
Li-Ion
1.5

EC declaration of conformity

230
10.8
400mA
4
Black & Decker declares that these products described
under "technical data" are in compliance with:
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2006/42/EC,
2
2014/30/EU and 2011/65/EU. For more information, please
contact Black & Decker at the following address or refer to the
Regulations 2008
REVDD12C Drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Black & Decker.
Director - Consumer Power Tools
Black and Decker UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
%
MACHINERY DIRECTIVE
REVDD12C Drill
back of the manual.
Ed Higgins
United Kingdom
15/11/2021