Protecting The Environment; Technical Data - Black and Decker BDCD8 Traducido De Las Instrucciones Originales

ENGLISH
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood
Weight
Charger
Input voltage
V
AC
Output voltage
V
DC
Current
mA
Approx. charge time
Hours
Battery
Voltage
V
DC
Capacity Ah
Type
Level of sound pressure according to EN 62841:
Sound pressure (L ) 60.7 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 71.7 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a )0.837 m/s
h, D
8
(Original instructions)
BDCD8
7.2
V
DC
400
-1
Min
Nm 8/12
mm 1-10
mm NA/20mm
kg 0.62
QW:90623494,
GB: 90623492
230
5
600
8
7.2
1.5
Li-Ion
2 2
, uncertainty (K) 1.5 m/s
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BDCD8 - Drill
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
Black & Decker.
Black and Decker UK, 270 Bath Road, Slough
Ed Higgins
Director - Consumer Power Tools
Berkshire, SL1 4DX
United Kingdom
15.12.2021