Hama RCR 110 Manual Del Usuario página 5

g Operating Instruction
Selecting Temperature / Alarm 1 / Alarm 2 / Dual time Display
- Press MODE will display the ALARM 1 time:
- Press MODE again will display the Alarm 2 time:
- Press MODE again will display the Dual Time:
- Press MODE again will display the Temperature
Indicator Standing For
Radio Signal
D Date
Foreign Time
Indication
PM PM
(12 HR Display only)
AM AM
(12 HR Display only)
Alarm 1
Alarm 2
- After the batteries are installed, the LCD will turn on and beep for 2 seconds.
The clock will automatically search the radio signal. It takes about 3-5 minutes
to fi nish this process.
- If the radio signal is received, the date & time will be set automatically with
radio control signal icon turns on.
8
00104952man_de_en_es_fr_nl_pl.indd Abs1:8-Abs1:9 00104952man_de_en_es_fr_nl_pl.indd Abs1:8-Abs1:9
All manuals and user guides at all-guides.com
Indicator Standing For
Radio Signal Weakly
Z z Repeat Alarm
Indication
M
Month
Summer Time
Indication
°C Degree Celsius
°F Degree Fahrenheit
Dual Time Dual Time
- If the clock fails to receive the time signal, it will be in Time/Temperature
display with the icon turns off. Then user can set the time manually.
- Radio-controlled signal will be scheduled to receive every hour.
Manual Time Setting
The system date and time can be set by pressing MODE for 3 seconds in Time/Temperature
display with the icon turn off.
Setting the Time
- Press MODE again: the year digits are blinking and can be
set by pressing or key.
- Press MODE again: the month digits are blinking and can be
set by pressing or key.
- Press MODE again: the date digits is blinking and can be
set by pressing or key.
- Press MODE: the hour digits are blinking and can be
set by pressing or key.
- Press MODE again the minute digits are blinking and can be
set by pressing or key.
To install the AC-DC adapter for Continue Projection:
Installation:
Use 2x AA, 1,5 V batteries and AC-DC adapter (included).
Important:
Please make sure your household voltage matched with the voltage
supported by the adapter, or it will damage your clock and adapter.
9
23.02.10 07:35 23.02.10 07:35