Charger Operation; Charging The Battery - SNOWJOE SUNJOE 24V-MDTCR1-CT Manual Del Operador

Charger Operation

m
WARNING!
Only charge Sun Joe
battery pack with its compatible Sun Joe
charger. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless metal detector you will need
an 24V iON+ System battery and charger. See page 17 for
battery and charger options and specifications, or for more
information visit sunjoe.com.

Charging the Battery

1. Push the push lock buttons on the battery to pull the
battery pack out from the battery compartment (Fig. 1).
Fig. 1
Battery pack
2. Depending on your Snow Joe
how to recharge your lithium-ion battery will vary. You
may either insert your 24-volt battery into the 24VCHRG-
QC Quick Charger (sold separately) or the 24VCHRG-
DPC Dual Port Charger (sold separately)
(Figs. 2 – 3).
24V lithium-ion
®
24V lithium-ion
®
Battery lock
button
+ Sun Joe charger model,
® ®
Fig. 2
Charging
red
24VCHRG-QC
quick charger
(Sold separately)
Fully
Charged
green
Fig. 3
Charging
red
Fully
Charged
green
3. The battery indicator LEDs will illuminate one by one
during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
4. The 24VCHRG-QC Quick Charger (sold separately) and
the 24VCHRG-DPC Dual Port Charger (sold separately)
are also equipped with additional charging indicating
lights which will indicate the charging status (Figs. 2 – 3).
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery.
8
Battery pack
Battery pack
24VCHRG-DPC
dual port charger
(Sold separately)