SNOWJOE SUNJOE SPX800-PRO Manual Del Operador página 7

5. Attach the hose upper frame panel onto the front of the
upper frame and secure it with the pair of machine screws
and nuts (Fig. 4).
Fig. 4
Upper frame panel
Machine
Screws
6. Install the foam cannon onto the back of the upper frame
panel (Fig. 5).
Fig. 5
Upper
frame
panel
7. Fit the lance into the trigger gun and rotate the collar until
the two parts are completely locked (Fig. 6).
Fig. 6
Trigger gun
Stainless
steel lance
8. Connect the high-pressure hose to the trigger gun (Fig. 7).
Nuts
Foam
cannon
Collar
Fig. 7
High-pressure hose
9. Connect the other end of high-pressure hose to the water
outlet of the pressure washer (Fig. 8).
Fig. 8
High-pressure hose
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
10. Thread your garden hose (male end) into the water inlet
(Fig. 9). The garden hose must have an internal
diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
Fig. 9
7
Trigger gun
Water outlet
Garden hose
Water inlet