- Information Center: Access to weather, financial and system
information
- AUX : Access to all devices connected via the AUX IN socket
- Configuration : various system settings, alarm
- Local Radio : Access to radio stations in a particular region (e.g. only
German stations)
- My mediaU : Access to an online media library. This menu item only
appears if the function has already been enabled under Configuration
> Manage my mediaU.
STANDBY
STANDBY / / / /
Press STANDBY
STANDBY
•
active alarm times display on the screen.
If you have setup a network connection, and use CR-2003 again within
•
the network, CR-2003 will automatically make the connection. In case you
desire to change the network, enter configuration
corresponding connection.
Use the letter keys to input numbers/letters.
•
Once you are on the letter you want, press � � � � to move to the next entry.
When you are at the end the input, press OK
� � � � to move to previous entry.
Press
/
the volume reel or press
press
to mute the sound.
4. 4. 4. 4.
About
About
Music
Music
About
About Music
Music streaming
Lenco
Lenco
CR-2003
CR-2003
Lenco CR-2003
Lenco
CR-2003 is the default device name for DLNA, and you may rename it
as you like. (See section 5.3)
The information below is the introduction of how to setup up media
streaming from PC or other media server. Study the own instruction of the
software or apps you use to enjoy music streaming if necessary.
to enter standby mode. The time, date and any
or rotate the volume reel to adjust the volume. Rotate
until volume level becomes 0, or direct
streaming
streaming
streaming
configuration
configuration to setup the
configuration
OK
OK
OK to confirm. You may press
16