Power Management; Sleep Timer - Lenco CR-2003 Manual Del Usuario

Configure the brightness of backlight on the display.
Select " " " " Power Power Saving Saving" " " " to set the brightness of backlight in standby mode,
Power Power Saving Saving
and select " " " " Turn Turn Turn
Turn On
Choose Dimmer Timer to set the duration of the radio changing backlight
when you are not controlling it.
5.3.7

Power Management

Configure to go to standby mode automatically during in the menu or/and
without Wifi signal.
Choose the power management timer (5/15/30mins) to set the duration of
the radio to switch standby mode automatically when you are not controlling
it.
Choose "Turn off" to ignore the power management function.
5.3.8

Sleep Timer

Turn off or set the sleep time of 15/30/60/90/120/150/180 minutes. Once
the time is set, there will be a bed icon with remaining minutes at the top
right corner and CR-2003 will turn to standby then. Press Sleep
control for the shortcut of this function.
5.3.9 Buffer
On On" " " " to set that in operation mode. On
31
Sleep Sleep on the remote Sleep