Lenco CR-2003 Manual Del Usuario página 26

The following podcast formats are supported:
- asx
- m3u
- pls
- pure streaming with HTTP, RTSP, MMS protocol
5.3.2 Network
Wireless Network Configuration
•
Enable / disable WiFi network. When you enable the WiFi network, the
system will automatically
Select
Select Select you required router. Select
You may refer to the section 3, Getting
Wireless Network (WPS PBC)
•
If you are using a router with WPS/QSS button, you may set up the
network connection simple via WPS function. Press WPS key on the
remote control or select the WPS network connection mode. Enter it
go to press the WPS/QSS button on your router within 120 seconds. The
connection between the router and Lenco CR-2003 will then be
configured automatically.
Getting Getting Started Started
Getting Started Started for the network setting.
26