Pre-Installation - Everbilt SW07501T Guía De Uso Y De Mantenimiento Del Propietario

Pre-Installation

APPLICATION
This submersible sewage pump is designed for pumping sewage, effluent, wastewater or flooded water with up to 2 inch solids.

TOOLS REQUIRED
Flathead
Screwdriver
MATERIALS REQUIRED (NOT INCLUDED)
NOTE: Parts shown below not to scale.
2 in. discharge
pipe
SPECIFICATIONS
Power supply
Liquid temp. range
Discharge size
Sump basin
Switch on/off
Phillips
Screwdriver
2 in. check
valve
115V, 60 HZ., 15 Amp Circuit
max.131°F (55°C)
2 in. FNPT
Minimum 18 in. (460 mm) diameter, 30 in. (760 mm) depth
On: 4 in. (102 mm), Off: 2.5 in. (63.5 mm)
Hand
Hacksaw or
PVC Cutter
Safety goggles
2 in. 90°elbow
4
Tape Measure
Wrench
Thread Tape
2 in.
adaptor