Front Panel - SWR Sound Natural Blonde PR 723 Instrucciones De Funcionamiento

Congratulations on your purchase of the new SWR® Natural
Blonde™ amplifier!
Although several models of SWR amplifiers have been a main-
stay with acoustic bassists over the years, the Natural Blonde is
our first amplifier designed specifically for you!
The Natural Blonde features two independent channels
equipped with the versatile SWR tone stack, which can be
adjusted to perfectly EQ two instruments, blend a multiple
pickup system with two channels, or be completely bypassed
for a truly "flat" acoustic signal. The multiple input and output
patching options offer exceptional versatility with any acoustic
pickup system, and the individual volume controls for the Hi-Fi
Foster horn - positioned low on the baffle to improve overall
sound quality - and rear-firing 5" speaker - which adds extra
ambiance - provide additional opportunities for fine-tuning
your sound to any performance situation.
The Natural Blonde is, quite simply, the truest form of amplifica-
tion available for your acoustic instruments. (By the way, electric
instruments sound great through the Natural Blonde too!)
We are confident that you will enjoy your Natural Blonde for
years to come, and thank you for "stepping up" to SWR.
��� ��
�������������
A . INPUT 1—Select "Balanced" or "Stereo" with the button below
the jack.
Balanced—Use with low impedance balanced or
unbalanced sources.
A balanced input requires a "TRS" connection:
(Tip=positive, Ring=negative, Sleeve=ground)
An unbalanced input uses a "TS" connection:
(Tip=positive, Sleeve=ground)

All manuals and user guides at all-guides.com
Natural Blonde
Natural Blonde™ Features
• 200 watts RMS
• 2x8" enclosure w/Hi-Fi horn & rear-firing 5" driver
• Classic SWR preamp w/Aural Enhancer™
• Bass Intensifier™ circuitry
• Compression circuitry
• Master tuning mute & individual channel mutes
• Two independent input channels w/-10dB pad & phase reverse
• ¼" Low Z Balanced or High Z Stereo input (ch. 1)
• Low Z Balanced XLR & High Z unbalanced ¼" input (ch. 2)
• 3-band active EQ for each channel
• EQ bypass function on both channels
• Independent XLR outputs for individual & summed channels
• Independent side-chain effects loop for each channel
• Footswitchable (Master Mute & Bass Intensifier)
• Convenient luggage-style telescoping handle w/ wheels
• Spring-handle on bottom of cabinet for carrying or operation in tilt-back

Front Panel

◊
mode
Stereo—Use with high impedance, stereo sources.
A stereo input requires a TRS connection:
(Tip=channel 1, Ring=channel 2, Sleeve=ground)
NOTE: Stereo mode uses both rows of channel controls
{C–L} and therefore Input 2 {B} is automatically disabled
when Stereo is selected.
◊