All manuals and user guides at all-guides.com
GRADE ROD DE0734
Congratulations!
You have chosen a D
WALT product. Years of
E
experience, thorough product development and
innovation make D
WALT one of the most reliable
E
partners for professional users.
Technical data
Max. measurements (extended)
Min. length (collapsed)
Weight
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Safety instructions
Always observe the safety regulations applicable
in your country to reduce the risk of fire, electric
shock and personal injury.
Read all of this manual carefully before operating
the attachment. Also refer to the manual of any
power tool that will be used with this
attachment.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Keep children away
Do not let children come into contact with the
tool or extension cord. Supervision is required for
those under 16 years of age.
3 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
DE0734.P65
Warning! The use of any accessory or
attachment or performance of any operation with
this tool, other than those recommended in this
instruction manual may present a risk of personal
injury.
Additional safety instructions for grade rods
DE0734
• Never attempt to use this attachment in a storm
cm 400
or near overhanging electric wires.
cm 120
kg 1.8
Package contents
The package contains:
1 Grade rod
1 Instruction manual
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your DE0734 grade rod has been designed to
extend the capabilities of your D
The grade rod can be used both indoor and outdoor
for height measurements.
Fig. A
1 Front measuring scale
2 Rear measuring scale
Assembly and adjustment
Extending the grade rod (fig. A & B)
The grade rod consists of several telescoping
sections. Each section is locked in place by a
spring-loaded button to hold the grade rod at
various lengths.
• To extend the grade rod one section, slide the
section out until the spring-
loaded button (3) engages.
• To shorten the grade rod one section, press the
button and slide the section back in.
9
E N G L I S H
WALT rotary laser.
E
Also refer to the manual of the tool to be
used with this attachment.
28-06-2001, 09:31
5