Evaluating Results; Saving, Displaying And Deleting Measurements - Sanitas SBM 52 Instrucciones Para El Uso

6. Evaluating results

Cardiac arrhythmia:
This unit can identify potential disruption of the heart rhythm when measuring and if necessary, indicates
this after the measurement with the symbol
nounce: "A possible cardiac arrhythmia was found." This can be an indicator for arrhythmia. Arrhythmia is
an illness in which the heart rhythm is abnormal because of flaws in the bioelectrical system that regulates
the heartbeat. The symptoms (skipped or premature heart beats, pulse being slow or too fast) can be
caused by factors such as heart disease, age, physical make-up, excess stimulants, stress or lack of
sleep. Arrhythmia can only be determined through an examination by your doctor. If the symbol
shown on the display after the measurement has been taken, it should be repeated. Please ensure that
you rest for 5 minutes beforehand and do not speak or move during the measurement. If the symbol
appears frequently, please consult your doctor. Self-diagnosis and treatment based on the measurements
can be dangerous. Always follow your GP's instructions.
WHO classification:
In accordance with the guidelines/definitions of the World Heath Organization, the measurements are clas-
sified and assessed according to the following table:
Blood pressure value category
Grade 3: severe hypertension
Grade 2: moderate hypertension
Grade 1: mild hypertension
High normal
Normal
Optimal
Source: WHO, 1999
The bar chart on the display and the scale on the unit show which category the recorded BMI values fall
into.
If the values of systole and diastole fall into two different WHO categories (e.g. systole in the 'High normal'
category and diastole in the 'Normal' category), the graphical WHO classification on the unit always shows
the higher category; for the example given this would be 'High normal'.

7. Saving, displaying and deleting measurements

Whilst the message is being displayed, the volume can be adjusted with the function buttons
The results of every successful measurement are stored together
with the date and time. If there are more than 30 measurements, the
oldest measurements are lost.
• Switch on the device with the Start/stop
• Select the desired user memory (
buttons .
All manuals and user guides at all-guides.com
. If the voice function is activated, the device will an-
Systole (in mmHg) Diastole (in mmHg) Action
> = 180
160 – 179
140 – 159
130 – 139
120 – 129
< 120
button.
... ) by pressing the function
17
> = 110 seek medical attention
100 – 109 seek medical attention
90 – 99 regular monitoring by doctor
85 – 89 regular monitoring by doctor
80 – 84 self-monitoring
< 80 self-monitoring
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
User memory 1
User memory 2
User memory 3
User memory 4
is
.