Setting Pc's Ip Address [Windows Xp] - JVC VN-C625 Manual Del Usuario

2-2 Setting PC's IP Address [Windows XP]

Upon installing the camera, set the IP address of the PC that is used to operate this
camera.
For Windows XP, set according to the following procedure.
☞
(For Windows 2000,
Note
Under a DHCP environment and when the IP address assigned to V. Networks is already known,
it will not be necessary to perform 2-2 "Setting PC's IP Address" as the PC's IP address is
automatically acquired from the DHCP server.
1.
Click .
• Right-click on [My Network] and select [Properties].
2.
Select the network for which the PC that operates this camera is connected to.
• Right-click to select [Properties].
All manuals and user guides at all-guides.com
Page 27)
Ensure that it is selected.
Note
Select "Install ..." if [Client for Microsoft
Networks] or [Internet Protocol (TCP/
IP)] is not displayed.
E-25