Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
(Original instructions)
Always hold the tool and screwdriver bit in a straight line
u
with the screw
Troubleshooting
Problem
Possible cause
Unit will not start.
Battery pack not
charged.
Battery pack will not
Charger not plugged
charge.
in.
Surrounding air
temperature too hot or
too cold.
Unit shuts off
Battery pack has
abruptly.
reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
10
(Übersetzung der ursprünglichen
Technical data
Voltage
No-load speed
Possible solution
Max. torque
Check battery pack charg-
ing requirements
Chuck capacity
Plug charger into a work-
Max Drilling capacity
ing outlet.
Steel/wood/Masonary
Move charger and battery
pack to a surrounding air
Weight
temperature of above 40
degrees F (45ºC) or below
105 degrees F (+40.5ºC)
Charger
Allow battery pack to cool
Input voltage
down.
Output voltage
Place on charger
Current
and allow to charge.
Approx. charge time
Battery
Voltage
Capacity
Type
Black & Decker declares that these products described under
The Supply of Machinery (Safety) Regulations, 2008, S.I.
These products conform to the following UK Regulations:
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
Anweisungen)
V
DC
Min
-1
Nm
mm
mm
kg
V
AC
V
DC
mA
Hours
V
DC
Ah
Level of sound pressure according to EN 62841:
Sound pressure (L
) 86.0 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L
) 97.0 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Drilling into concrete (a
) 6.8 m/s
, uncertainty (K) 1.5 m/s
2
h, ID
Drilling into metal (a
) 1.8 m/s
, uncertainty (K) 1.5 m/s
2
h, D
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BCD003 - Impact drill
"technical data" are in compliance with:
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
2012/3032 (as amended).
DEUTSCH
BCD003
18
0 - 360/0 - 1400
45
1-10
10/25/10
0.9
905902**
906349**
230
230
18
18
400
1A
3 - 5
1.5
BL1518
18
1.5
Li-Ion
2
2
Publicidad
Tabla de contenido
