Mesis PressoMedical 3.0 ZAM-03 Manual De Usuario página 41

3
Controlling Intensity
Make sure that all air hoses don't get folded or twisted during the entire
•
operation and check the air hose plug if you feel any low compression.
The intensity level should be checked before use.
•
If the intensity control knob is pointing
•
-
Turn clockwise to increase to set up your desired intensity.
To stop the operation, turn the control knob and have it pointed at
•
-
The unit will stop, and cuffs will be deflated. (Time light blinks.)
You may feel pain if the intensity level is too high or the duration time is
•
set too long.
Right level of intensity and time for you should be set.
•
4
After the use
■ Deflation of the cuff will begin when the timed mode is over.
■ Remove the air hose plug from the unit.
■ Take off the cuff and unplug the power.
Turn clockwise to increase and turn counter
•
clockwise to decrease the intensity.
Begin at its lowest level and gradually increase the
•
intensity.
Caution
41
, the unit will not begin.
.