Removing The Front Panel; Attaching The Front Panel; Resetting The Microprocessor - Pioneer FH-P4100R Manual De Operación

Before You Start
Important
! Never use force or grip the display and the
buttons tightly when removing or attaching.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight
and high temperatures.

Removing the front panel

1 Press DETACH to release the front
panel.
Press DETACH and the left side of the panel is
released from the head unit.
DETACH button
2 Grab the front panel and remove.
Grab the left side of the front panel and pull
away to the right. The front panel will be de-
tached from the head unit.
3 Put the front panel into the
protective case provided for safe keeping.

Attaching the front panel

1 Place the front panel flat against
the head unit.
2 Press the front panel into the face
of the head unit until it is firmly seated.
5 CRD3576-A
All manuals and user guides at all-guides.com
Black plate (5,1)
Resetting the
microprocessor
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time after
installation
! If the unit fails to operate properly
! When strange or incorrect messages appear
on the display
1 Remove the front panel.
See Removing the front panel on this page.
2 Press RESET on the head unit with a
pen tip or other pointed instrument.
RESET button
Section
01
5
En