Built-In Cd Player; Playing A Cd - Pioneer FH-P4100R Manual De Operación

Built-in CD Player

Playing a CD

1
4
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
page 25.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 CD EJECT button
Press to eject a CD from your built-in CD
player.
4 SOURCE button
Press to select the built-in CD player as the
source.
5 c/d buttons (Track search and FF/
REV)
Press to select a track from the current CD
and for fast forward and reverse.
6 VOLUME button
Press to increase or decrease the volume.
23 CRD3576-A
All manuals and user guides at all-guides.com
2
3
5 6
Black plate (23,1)
1 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
# You can eject a CD by pressing CD EJECT.
2 After a CD has been inserted, press
SOURCE to select the built-in CD player.
Press SOURCE until you see CompactDisc dis-
played.
3 Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
4 To perform fast forward or reverse,
press and hold c or d.
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press CD EJECT to eject the disc, and check
the disc for damage before inserting the disc
again.
Section
07
23
En