TechniSat HD-Vision 32 Instrucciones De Funcionamiento página 5

When the TV set is not in use for longer periods
Disconnect the mains power plug and antenna plug during
thunderstorms and when the TV set is not in use for longer
periods.
Power surges can damage the TV set.
You should disconnect the TV set from the mains power supply and
ask a qualifi ed person for help in the following situations:
- The electrical cable is damaged.
- The TV set has been subjected to moisture or a liquid has
entered the TV set.
- The TV set is malfunctioning seriously.
- The TV set has suffered serious damage to its exterior.
Wall mounting
You can fasten your equipment to a suitable wall with an appropriate
wall bracket, e.g. TechniSat HD-Mount (Item No. 2020/2632) or
TechniSat HD-Mount LCD wall bracket (Item No.: 2020/2732).
You must fi rst disassemble the base stand for this purpose.
Removing the base stand
> Please note, that you must remove the loudspeaker cables
from the connecting terminals before removing the base stand
of versions with bottom loudspeakers.
> Place the equipment, screen downwards, on an even surface.
Take care that the panel is not subject to any pressure and that
the LCD panel is not damaged.
Loosen and remove both marked screws.
Now carefully remove the base stand from the lower side of the
equipment.
A special additional profi le is required in order to continue using
the provided loudspeakers on the version with bottom loudspeakers
after mounting on a wall. This additional profi le with the following
designation and item no. is available from your specialised dealer.
HD-Vision 32: HD-Mount Adapter 32" Item No. 0001/3240
HD-Vision 40: HD-Mount Adapter 40" Item No. 0002/3240
Removable loudspeakers
Your device is equipped with removable loudspeakers. These can
be removed, if:
- you would like to set up the loudspeakers separately on
the loudspeaker stand (only possible for versions with side
loudspeakers).
- you would like to attach the loudspeaker to an additional
profi le, after wall mounting (see item 3.8.1), (Only possible for
versions with bottom loudspeakers).
All manuals and user guides at all-guides.com
EN
- you would like to connect the device to a hi-fi or surround
unit (see item 4.) and do not want to use the device
loudspeakers.
Removing the loudspeakers
> Remove the loudspeaker cables from the connecting
terminals. For this purpose, press down the spring contact
and pull the cable out.
> Using a suitable screwdriver, loosen the fastening screws of
the loudspeaker(s) and remove it / them.
Version with bottom
loudspeaker
> Cover up the loudspeaker attachment openings using the
supplied covers.
Information regarding disposal
All the packaging that came with your TV set is made from
recyclable materials. Please sort the materials and dispose of
them correctly for recycling.
At the end of its lifetime, this product must not be disposed of
in the normal household waste but must be taken to a recycling
collection point for electrical and electronic appliances. The
symbol displayed on the product, the operating instructions or
packaging refers to this.
The materials can be recycled in the way indicated by their labels.
You are making an important contribution to the protection of our
environment by reusing end-of-life appliances, recycling their
materials or recycling them in other ways.
Please ask your municipal authority for information about your
local disposal site.
5
Version with side
loudspeaker