Fig. 16: Lift up the cup tray.
Extracting a drink in a tall glass
• If you wish to extract a drink (espresso coffee, coffee or tea) into a receptacle
whose height is greater than the distance between the cup tray and the
extraction nozzle in its initial position, please follow these instructions:
• Lift up the cup tray (see Fig. 16).
• Place a tall glass on the surface which supports the coffee machine under
the extraction nozzle.
• Press the control panel button corresponding to the drink desired.
• Follow the steps relating to extracting the selected drink in accordance with
the paragraphs above.
Warning: If, during the drink preparation, there is any alert because
of a lack of water, blockage or fault in the used capsule tank, the
equipment will/must be stopped immediately.
For further information about the meaning and definition of the alerts and the
luminous alarms, consult the "Alerts and Alarms" chapter (see Page 101).
• The equipment returns to the "Ready to use" mode and all the luminous
indicators of the control panel buttons are illuminated green (see Fig. 8).
• Empty the used capsule tank and the drip basin frequently.
• Always turn off the coffee machine by pressing/switching the On/Off
general button. Remove the electrical plug from the respective socket whe
never the equipment is not being used.
QOSY
95