Samsung RF30HB Manual Del Usuario página 12

4. Open the door (more than 90°), lift from the
middle hinge, and then remove the door.
- Due to its design features, you can disassemble
and re-assemble the door only when the
door is open. (The holes in the Door Shaft
and the Door Middle Hinge are deliberately
tilted at specifi c angles so that it is diffi cult to
disassemble and re-assemble with the door
closed.)
CAUTION
Place the door, inside facing up, on a non-
scratching surface.
Door Middle Hinge Door Middle Hinge
Check the direction Check the direction
- If the Auto Closing Hinge is aligned to be
vertical as shown in the fi gure, align it to be
parallel by using the Door Middle Hinge. (See
Step 5 on the right for instructions explaining
how to disassemble the Door Middle Hinge.)
DA68-03030A-01.indb 12 DA68-03030A-01.indb 12
All manuals and user guides at all-guides.com
Do not use a fl at head screwdriver to align the
Auto close Hinge. It may get damaged. Use the
Door middle Hinge instead.
5. Remove the screw ( 8 ) attached to the
Auto Closing Hinge Auto Closing Hinge
English - 12
CAUTION
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts ( 9 ) attached to
the lower left and right door hinges with an allen
wrench (3/16").
Remove the lower left and right door hinges
( 10 ).
(10)
(8)
(9)
Allen wrench Allen wrench
2014. 5. 13. 2014. 5. 13. 2:15 2:15