ARGENTO OMEGA+ Manual De Uso Y Mantenimiento página 18

Preparing the bike for use on the road
Before using the EPAC, we recommend carefully checking all the parts to ensure it is ready
to use and adjusting the relevant mechanical parts, directly or with the help of specialist
technicians, see: adjustment and tightening
of the handlebars and handlebar attachment, adjustment and tightening of the saddle
and seat post, adjustment of the brakes and gear change, checking of the tyre pressure,
lubrication of the chain and gears, general inspection of the correct tightening of the
fastening screws and general check that all the parts are in order.
Wheels
Check the correct installation, tightening of the pass-through pins and/or quick-release of
the wheels.
Check the state of wear of the tyres: there must be no cuts, cracks, foreign bodies, abnormal
swelling, visible inner tyre and other damage.
Check the tyre pressure by referring to the recommended value on the side of the tyre (3.5-
5.9 BAR).
Braking system
Check that the brakes are working correctly by attempting to brake at low speed (max
6km/h) in an obstacle-free space.
16